Step 1. Apply Signature Colours Tuscan Accents Base Coat with 9.5 mm or 12.7 mm nap roller and allow to dry for 24 hours. Do not use a substitute base coat. Using the Colour Washing brush, apply Tuscan Accents in small crisscross X patterns. Work in 91 cm x 91 cm sections using random strokes and filling in all white space. Use a light touch and vary your strokes to create random X patterns.

Step 2. In the same 91 cm x 91 cm section, without reloading the brush and while the painted section is still wet, blend the X pattern brush strokes using long, sweeping motions going both vertically and horizontally. This ensures a blended, smooth appearance.

Step 3. Wait 10 minutes or until the surface has started to loose the "wet look." Use the Tuscan Smoother to "open" the raised white particles on the surface. Hold the smoother at a 30° angle to the surface. Using a light touch, sweep the smoother over the surface in random patterns using both sides of the smoother. Use a lighter touch and vary the direction of each stroke. If scratches or streaks occur, you may be attempting to smooth too soon or are pressing too hard.

Shown in TUS2 Tuscan Gold 1

Colour accuracy will vary based on monitor and printer calibrations. Please visit your local retailer to view actual colour samples before making final painting decisions.

Try your technique on a practice board before you try it on the walls.

For a simple transformation or quick update, this technique is easy to paint over. No sanding or stripping of the underlying faux finish is needed. Just apply a topcoat of paint and you're done!